Figure 6 - Home Screen With Stop Button - York YK Style H Operation Manual

FORM 160.76-O2
issue date: 6/15/2015

FIGURE 6 - HOME SCREEN WITH STOP BUTTON

NAVIGATION
System
Used to provide additional system information.
Evaporator
A detailed view of all evaporator parameters, including
the programmable Leaving Chilled Liquid Setpoints.
Condenser
A detailed view of all condenser parameters, including
control of the liquid level functions.
Compressor
A detailed view of all the compressor parameters. This
includes Pre-rotation Vane control, Hot Gas Bypass
Control and PRV Calibration.
Capacity Control
A detailed view of all the parameters associated to the
chiller capacity. VSD, PRV, Hot Gas etc.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Motor
A detailed view of the motor controller parameters,
specific to the controller type presently utilized on the
chiller system. This allows programming of the current
limit and the pulldown demand limit values. For a VSD
system, the Adaptive Capacity Control and Harmonic
Filter information is controlled under this screen.
Setpoints
This screen provides a single location to program the
most common system setpoints. It is also the gateway
to many of the general system setup parameters such as
Date/Time, Display Units, Scheduling, Printer Setup,
etc.
History
This screen provides access to a snapshot of system
data at each of the last 10 shutdown conditions.
LD19446
23
2