FORM 160.76-O2
issue date: 6/15/2015
FIGURE 53 - SECURITY LOG DETAILS SCREEN
OVERVIEW
This screen allows the user to view the details of
a logged setpoint change, selected from the list on
the SECURITY LOG Screen. The date and time the
setpoint was changed, the new and old setpoint value
and access level and User ID used to make the change
are displayed. The data on this screen can be printed.
Requires a login access level of SERVICE.
Service Technicians refer to the OptiView
Control Center - Service Instructions
(Form 160.76-M1) for operation instruc-
tions and explanation of all programmable
setpoints and displayed values.
DISPLAY ONLY
Description
Displays the setpoint/category that was changed.
Time
Displays the time the setpoint was changed.
JOHNSON CONTROLS
SECURITY LOG DETAILS SCREEN
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Date
Displays the date the setpoint was changed.
Access Level
Displays the login Access Level used to make the
setpoint change.
User ID
Displays the login User ID used to make the setpoint
change.
Old Value
Displays the previous setpoint value.
New Value
Displays the value entered at the time of the setpoint
change.
PROGRAMMABLE
Print
Generates a report of change parameters displayed on
this screen.
00663VIP
149
2