FORM 160.76-O2
issue date: 6/15/2015
FIGURE 52 - SECURITY LOG SCREEN
OVERVIEW
This screen displays a listing of the last 75 setpoint
changes. They are listed and numbered in reverse order
in which they were changed, with the most recent listed
as number 1. Multiple pages are necessary to display
all 75 changes. Not all setpoints are logged. Service
Technicians refer to list in OptiView Control Center –
Service Instructions (Form 160.76-M1).
The details of any setpoint change can be viewed by
navigating to a subscreen that displays the date and
time of the change, access level and User ID used to
make the change, the old setpoint value and the new
setpoint value.
Requires a login access level of SERVICE.
Service Technicians refer to the OptiView
Control Center - Service Instructions
(Form 160.76-M1) for operation instruc-
tions and explanation of all programmable
setpoints and displayed values.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
SECURITY LOG SCREEN
DISPLAY ONLY
Category
Displays the category of the setpoint (motor, evapora-
tor, condenser, etc.).
Setpoint
Displays the setpoint that was changed.
New Value
Displays the value that was entered at the time of the
setpoint change.
PROGRAMMABLE
Log Entry
Allows the user to select a particular setpoint change
for detail viewing.
Print
Generates a detailed report of all setpoint changes list-
ed in the setpoint change log.
Page Up
Scroll up in the displayed data (if applicable).
00662VIP
147
2