York YK Style H Operation Manual page 109

FORM 160.76-O2
issue date: 6/15/2015
Shutdown
Access Level Required: SERVICE
If the Auto Lube Setpoint is set to Disabled, the Shut-
down Setpoint is used to enable or disable the safety
shutdown that occurs if the operating hours exceed
the shutdown setpoint since last lubrication. The safe-
ty shutdown can be enabled or disabled per the cus-
tomer's preference. If enabled, the safety shutdown
will occur at the normal operating hours. If disabled,
a warning will be displayed but the safety shutdown
will not occur.
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
Motor
Access Level Required: VIEW
Returns user to MOTOR Screen.
2
109