Power Connector Cable - HP 15-BQ0 Series Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. System board (see
c. Speakers (see
d. Display assembly (see
Remove the power connector cable:
Remove the power connector cable.
▲
Reverse this procedure to install the power connector cable.
60 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 31)
System board on page
Speakers on page 49)
Display assembly on page
29), and then remove the following components:
42)
51)
Spare part number
933523-001