Fan/Heat Sink Assembly - HP 15-BQ0 Series Maintenance And Service Manual

Fan/heat sink assembly

NOTE: The fan/heat sink assembly spare part kit includes the fan cable and replacement thermal material.
Description
For use only on computer models equipped with an AMD Ryzen5 processor
For use only on computer models equipped with an AMD FX, A12, or A9 processor
Before removing the fan/heat sink assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the fan/heat sink assembly:
1. Disconnect the fan cable (1) from the system board.
2. Loosen the four Phillips PM2.0×6.2 captive screws (2) that secure the fan/heat sink assembly to
the system board.
Bottom cover on page
Battery on page 31).
System board on page
29).
42).
Component replacement procedures
Spare part number
L00161-001
924328-001
45