Clickpad - HP 15-BQ0 Series Maintenance And Service Manual

ClickPad

NOTE: The ClickPad spare part kit does not include the ClickPad bracket or ClickPad cable. The ClickPad
bracket is available using spare part number 924352-001. The ClickPad cable is available using spare part
number 924351-001.
Description
For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx
For use only on computer models with model numbers 15m-bq0xx and 15-bq0xx
Before removing the ClickPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the ClickPad:
1. Release the ZIF connector (1) to which ClickPad cable is connected, and then disconnect
the ClickPad cable from the system board.
2. Detach the ClickPad cable (2) from the keyboard/top cover. (The ClickPad cable is attached to
the keyboard/top cover with double-sided adhesive.)
3. Remove the four Phillips PM2.0×3.4 (3) that secure the ClickPad bracket to the keyboard/top cover.
4. Remove the ClickPad bracket (4).
5. Remove the three Phillips PM2.0×2.2 broad head screws (5) that secure the ClickPad to the keyboard/
top cover.
40 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 31).
29).
Spare part number
L00657-001
924341-001