Speakers - HP 17 Maintenance And Service Manual

Speakers

Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
7. Remove the system board (see
Remove the speakers:
1. Remove the antenna cables from the clips in the left speaker (1).
2. Remove the speaker cable from the clips built into the computer (2), and then remove the speakers from
the computer (3).
Reverse this procedure to install the speakers.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page 38).
System board on page
32).
36).
60).
Spare part number
L22580-001