Fan - HP 17 Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the fan:
1. Disconnect the fan cable from the system board (1).
2. Remove the two Phillips M2.5×3.0 screws (2) that secure the fan to the computer.
3. Lift the fan from the computer (3).
Reverse this procedure to install the fan.
Optical drive on page
Bottom cover on page
Battery on page 38).
32).
36).
Component replacement procedures
Spare part number
L22529-001
55