System Board Hook - HP 17 Maintenance And Service Manual

System board hook

Description
System board hook
Before removing the system board hook, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the optical drive (see
5. Remove the bottom cover (see
6. Remove the battery (see
Remove the system board hook:
1. Remove the Phillips M2.0×3.0 screw (1) that secures the hook to the computer.
2. Remove the system board hook from the computer (2).
Reverse this procedure to install the system board hook.
48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page 38).
32).
36).
Spare part number
L22748-001