11.Continue to assemble the positioner by executing steps 7 to 5 in reverse order. Check
12.Now check carefully whether the feedback shaft
13.Once you have completed all previous steps successfully, continue by performing steps 4
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
whether the position of the O-rings is correct. Make sure no loose items in the enclosure
interfere with the assembly.
If you feel resistance, do not continue to turn but turn the feedback shaft
the point of removal, making sure to remember the previously performed steps.
to 1 in reverse order.
4.7 Installing the optional modules
⑲
can be smoothly turned by 360°.
Installing/mounting
⑲
back again to
61