Explanation Of Ex Information - Siemens SIPART PS2 Operating Instructions Manual

Layout of Ex nameplate
Technical data and temperature classes see certificate / operating instructions
TÜV 12 ATEX 107540 X / IECEx TUN 12.0028 X / TÜV 11.0287 X TÜV 12 ATEX 107540 X / IECEx TUN 12.0028 X / TÜV 11.0287 X
ATEX
II 2 G Ex ia IIC T4 Gb
Logo
II 2 D Ex ia IIIC 110°C Db
II 3 G Ex nA IIC T4 Gc
IS / 1 / AEx / Ex ib / IIC, Gb
FM Logo
IS / 21 / AEx / Ex ib / IIIC, Db, T110°C
DIP / 21 / AEx / Ex tb / IIIC, Db, T100°C
NI / 2 / AEx / Ex nA, Ex ic / IIC, Gc
-
Before commissioning permanently
remove indications of the protection
type which are not being used.
2001.1233781.
①
Approvals
②
ATEX/IECEx marking for hazardous area
Figure 3-6 Ex nameplate layout, example
3.2.3

Explanation of Ex information

Explanation of Ex information
①
②
③
Figure 3-7
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
II 3 G Ex ic IIC T4 Gc
II 2 D Ex tb IIIC T100°C Db
-
IS / I, II, III / 1 / A-G
-
DIP / II, III / 1 / E-G
NI / I / 2 / A-D
Install per control Drawing A5E00065622D
-
-30 ≤ Ta ≤ +80°C(T4)
Technical data and temperature classes see certificate / operating instructions
TÜV 12 ATEX 107540 X / IECEx TUN 12.0028 X / TÜV 11.0287 X TÜV 12 ATEX 107540 X / IECEx TUN 12.0028 X / TÜV 11.0287 X
II 2 G Ex ia IIC T4 Gb II 3 G
II 2 D Ex ia IIIC 110°C Db II 2 D
II 3 G Ex nA IIC T4 Gc
Category for operating range
Type of protection
Group (gas, dust)
Explanation of Ex information
F-Nr .: ARR P3-123456
TÜV 1
1 A
IECEx TUN
II 2 G Ex d IIC
XP
XP
DIP
APPROVED IP
XP
Ex d IIC
DIP
2006.1773456
S-XPL/090873
Inmetro Logo
13-KB4BO-0105
KCS logo
Technical data and temperature classes see
certificate / operating instructions
Nepsi Logo
SEAL ALL CONDUITS WITHIN 18 INCHES
13-KB4BO-0369
③
FM/CSA marking for hazardous area
④
Permitted ambient temperature for the hazardous
area of the corresponding temperature class
Ex ic IIC T4 Gc
Ex tb IIIC T100°C Db
④
⑤
TEX 093266 X / 0044
12 .0001 X / TÜV 12.0940 X
T6 /T4 Gb
, CL.I, DIV .1, GP .ABCD
, CL.I, Zone1, GP .IIC
, CL.II, DIV .1, GP .EFG, CL.III, DIV .1
66 / NEMA 4x
, CL.I, DIV .1, GP .CD
, CL.II, DIV .1, GP .EFG, CL.III, DIV .1
3 - 0≤ T a ≤ +50(T6)/ 8 0(T4)°C
Maximum surface temperature (tempera‐
ture class)
Device protection level
Description
3.2 Structure
25