Operating Instructions - Health O Meter 524KL User Instructions

OPERATING INSTRUCTIONS

WEIGHING A PATIENT – MODELS 524KL AND 524KG
1. Make sure there is nothing on the weighing seat.
2. Press the ON/OFF button to turn the display assembly on. "88:8:8.8" will appear on the
display followed by zeroes.
3. Place the baby on the weighing seat so that its weight is evenly distributed. The scale will
begin to display weight information and will lock on the patient's weight when the stable
weight of the patient is determined. Depending on the movement of the patient on the scale,
it may take several seconds for the scale to lock onto the weight. When a stable weight is
calculated, a small ring will appear on the display along with the baby's weight. If the display
shows "OVER" you have exceeded the capacity of the scale.
Caution: To prevent patient injury, the patient must be attended throughout the entire
weighing event.
4. The weight may be held on the display by pressing the HOLD/RELEASE button. To
release, press the HOLD/RELEASE button again.
5. After the weight measurement has been taken and is recorded, remove the baby from the
scale.
6. Press the ON/OFF button to turn the scale off.
ZERO FUNCTION – MODELS 524KL AND 524KG
Zeroes the scale prior to a weight measurement. The ZERO/TARE button is also used in the
Tare function as outlined below.
TARE FUNCTION – MODELS 524KL AND 524KG
The tare function allows you to place other items on the scale while weighing the baby without
affecting the baby's weight reading.
1. With all weight off the scale, press the ON/OFF button to turn on the scale.
2. Wait until zeroes appear on the display.
3. Place the object on the scale. The display will show a value for the object's weight.
4. Press the ZERO/TARE button. The word "TARE" will appear on the display, followed by
zeroes.
5. Keep the object on the platform, and place the baby on the weighing seat. The scale will
display the baby's weight.
Note: If the scale does not return to zero when you remove the object and baby from the
weighing seat, press the ZERO/TARE button to return the scale to zero.
11