TP-Link 9970 Reconfiguration Manual

nbn Service Upgrade User Guide
TM
Modem Reconfiguration Guide - TP-Link 9970
Congratulations in upgrading your existing ADSL service to your new
ACN nbn™ Broadband Service
This guide details the steps to follow when setting up your new NBN Service using your existing ACN supplied TP-LINK
modem.
If you ordered an ACN nbn™ + Phone Bundle service you should also have received an ACN VoIP package that includes
the equipment you need to set up the phone component of your nbn™ + Phone service, plus a separate User Guide.
important that you complete the set-up of your ACN nbn™ Broadband service prior to attempting the set-up of the Phone
component of your Service. For further details, refer to the User Guide provided with your VoIP Phone service.
Important Note:
Activation email (sent to the email address you provided us when you signed up for your ACN migration service).
This email confirms that your new ACN nbn Broadband service is ready for set up.
This Setting up your ACN nbn™ Broadband Service (reconfiguring the ACN Modem)
Before you begin reconfiguring your existing ACN Modem, please remove the ADSL filter and any existing telephone lines
that are connected to the telephone socket. Then reconnect the modem telephone cable to the telephone socket.
Existing ADSL Connection
©2017 ACN Inc. All rights reserved
MKTG-101 FTTN & FTTB - TP-Link TD-W9970 - 11.07.2017
Before you begin the set up and configuration, please ensure that you have received your ACN
ACN Pacific Pty Ltd
New NBN Connection
To be connected via an ATA
to the modem at a later stage
ABN 85 108 535 708
It is
www.acnpacific.
Page 1 of 4