TP-Link TL-WN722N Quick Installation Manual

Quick Installation Guide
150Mbps High Gain Wireless
For Mac OS X
USB Adapter
MODEL NO. TL-WN722N
1
Connect to a Computer
Option 1: Directly Option 2: Via the USB Extension Cable
2 3
Install Driver and Utility Join a Wireless Network
a. Download the driver and utility from this Option 1: Via TP-Link Utility
product's Support page at
www.tp-link.com.
a. Click (TP-Link Utility) on the menu
bar.
Note:
If your computer has a CD drive, you can also run the
included CD to install the driver and utility. b. Select your Wi-Fi network and enter the
Wi-Fi password when prompted.
b. Unzip the downloaded folder and run the
Install.pkg.
c. Follow the instructions to complete the
installation.
SHELL
Install.pkg Uninstall.command
Option 2: Via Wi-Fi Protected Setup (WPS)
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until the WPS
progress window appears.
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-Link_XXXX
TP-Link_0903
TP-Link_ 0210
TP-Link_0001
Join Other Network...
WPS...
Open Wireless Utility...
WPS
WPS Progress： Scan Active WPS AP
PIN PBC Cancel
c. When the "WPS Protocol Finished!!"
message appears, click OK.