Chapter 3: Installing The Inverter; Inverter Package Contents; Identifying The Inverter - SolarEdge StorEdge Installation Manual

Chapter 3: Installing the Inverter

Chapter 3: Installing the Inverter
Install the inverter either before or after the modules and poweroptimizers have been installed.
CAUTION!
Do not rest the connectors at the bottom of the inverter on the ground, as it may damage them. To
rest the inverter on the ground, lay it on its back.

Inverter Package Contents

One StorEdge inverter

One mounting bracket

Two Allen screws for fastening the inverter to the mounting bracket

SolarEdge activation card

One 9V battery

Allen key f or opening the StorEdge Connection Unit

Installation guide (with activation card and instructions)


Identifying the Inverter

Refer to the sticker on the inverter t hat specifies its Serial Number and its Electrical Ratings. P rovide the
serial number when contacting SolarEdge support. The serial number is also required when opening a
new site in the SolarEdge monitoring platform.
18
StorEdge Inverter Installation Guide MAN-01-00390-1.1