TP-Link TL-R470T+ Installation Manual

Installation Guide

TL-R470T+ / TL-R600VPN
For simplicity, we take TL-R600VPN as an example throughout this Guide.
Connection
Modem
Configuration
1. Connect a PC to a LAN port of the router with an RJ45 cable properly. If
your computer is configured with a fixed IP, change it to "Obtain an IP
address automatically".
2. Open a web browser and type the default management address
http://192.168.0.1 in the address field of the browser, then press the
Enter key.
1
Connect the WAN port of the
router to the cable or the DSL
modem with an Ethernet cable.

LED Explanation

Power
On: Power on
Off: Power off
System
Flashing: System running normally
On/Off: System running abnormally

Package List

Router Ethernet Cable
TL-R600VPN
2
PC
Connect the LAN port of the
router to the computer with
an Ethernet cable.
3. Create a username and a password for subsequent login attempts.
Link/Act
On: There is a device connected to the
port but not active.
Off: There is no device connected to
the corresponding port.
Flashing: Transmitting or receiving data
Power Adapter Installation Guide
3
Connect the DC power socket on
the router to an electrical outlet
with the power adapter provided.