Set-up
If the computer does not automatically connect to the WiFi Range
Extender, the network must be manually set up by entering the
following (open the network settings of your computer):
IP address:
Subnet mask:
Standard gateway:
Set up using the WPS button
If your router contains a "Push Button Configuration" or WPS button
(PBC/WPS) it is possible to carry out a quick configuration for new
devices in the network and to also connect the WiFi Range Extender
to the WLAN.
1. Plug WiFi Range Extender into a mains socket.
2. Switch on repeater using the ON/OFF switch. The Power-LED is on.
40
192.168.10.x (with x in range 2-254)
255.255.255.0
192.168.10.1