Quick start instructions
Quick start instructions
The WiFi Range Extender can be installed in a few steps, manually
or via App. For manual installation, follow the below steps. The
installation via App is described from page 28 onwards.
1. Plug the WiFi Range Extender into a socket close to the router.
Slide the mode switch
Extender to "AP/Repeater" and switch on repeater.
2. Wait until Power LED
constantly on (this can be up to 1 minute).
3. Connect a WiFi enabled device with the open WiFi network "WiFi
Repeater". When using a Smartphone or tablet ensure that
option "Mobile Data" is deactivated.
4. Open Internet browser. The device should show that no Internet
connection is available.
22
on the base of the WiFi Range
9
is constantly on and WiFi/WPS-LED
4
is
7