SolarEdge SE50K Installation Manual page 61

Creating an Ethernet (LAN) Connection
8. The inverter is configured by default to LAN. If r econfiguration is required:
a. Verify the ON/OFF switch is OFF.
b. Verify the AC is on.
c. Close the cover and turn ON the Connection Unit.
WARNING!
ELECTRICAL SHOCK HAZARD. Do not touch uninsulated wires when the Connection Unit
over is removed.
d. Use the SolarEdge SetApp to access the Commissioning main menu screen as described in
Communication on page 38.
e. From the main menu tap Communication. The Communication screen is displayed:
Server
LAN
RS485-1
RS485-2
ZigBee
Wi-Fi
RS232
Cellular
GPIO
Modbus
TCP port
60
Extended Power Commercial Inverter Installation Guide MAN-01-00402-1.0
Communication
LAN
DHCP
SolarEdge Slave
Multi -Device
(Modbus)
Home Automation
Master
SEDG-7E129A09-33
SolarEdge GSM
N/A
RRCR
Disable
›
›
›
›
›
›
›
›
›