SolarEdge SE50K Installation Manual page 52

Energy: The total energy read by the meter. The value displayed in this line depends on the meter type
l
connected to the inverter and its location:
If a bidirectional meter is connected at the consumption point, this value is the consumed energy.
o
If the meter is installed at the production connection point, this value is the energy produced by
o
the site.
If the meter is installed at the grid connection point, this value is the energy exported to the grid.
o
NOTE
This data is accumulated according to an internal real-time clock.
Extended Power Commercial Inverter Installation Guide MAN-01-00402-1.0
Chapter 5: Activating, Commissioning and Configuring the System Using SolarEdge
51