Limit: Limitation setting (Export or Production)
o
Inverters: Number of c onnected inverters in the cluster, including the master.
o
Inverter status: Displays status parameters of the primary unit of the master inverter. Refer to Main
l
Inverter Status on page 47 for detailed information.
Inverter Units: Displays the status parameters of the master's primary unit and secondary units.
l
Refer to the values description in the Main Inverter Status section above.
Communication Status
This screen displays the status of connection option(s): LAN, RS485, Wi-Fi, GSM or ZigBee card.
Communication
LAN
Connected
Cellular
N/A
For each communication option, one of the following statuses is displayed:
Connected: The inverter established a successful connection and communication with the specified
l
server port/device
NC: Not Connected. Refer to Troubleshooting Communication on page 71
l
S_OK: The connection to the SolarEdge monitoring platform is successful (should appear only if the
l
inverter is connected to the server)
N/A : Not Applicable
l
x of y: Number of devices connected out of all devices
l
Temporarily displayed (with a
l
Initializing communication
o
Connecting to a network
o
Connecting to SolarEdge servers
o
Error message (with the sign). Refer to Troubleshooting Communication on page 71.
l
Extended Power Commercial Inverter Installation Guide MAN-01-00402-1.0
Chapter 5: Activating, Commissioning and Configuring the System Using SolarEdge
RS485-1
RS485-2
SE Slave
Modbus
NC
2 of 2
Wi-Fi
ZigBee
NC
NC
clock sign):
49