Information - SolarEdge SE50K Installation Manual

Information

From the main menu, select Information to view and set various system settings, as described below.
Information
CPU Version
DSP1 Version
DSP2 Version
Serial Number
Hardware IDs
Error Log
Warning Log
CPU Version: The communication board firmware version
l
DSP 1/2 Version: The d igital board firmware version
l
NOTE
Please have these numbers ready when you contact SolarEdge Support.
Serial Number - The inverter serial number as appears on the enclosure sticker
l
Hardware IDs: Displays the following HW serial numbers (if exist, and connected to the inverter):
l
This inverter: t he inverter's ID
o
Meter # : Modbus meter ID (up to 3 meters can be connected)
o
ZB: Z igBee Card MAC address
o
WiFi: Wi-Fi MAC address
o
Error Log: Displays the last five errors, and enables resetting (clearing) the log.
l
Warning Log: Displays t he last five w arnings, and enables resetting (clearing) the log.
l
Extended Power Commercial Inverter Installation Guide MAN-01-00402-1.0
Chapter 5: Activating, Commissioning and Configuring the System Using SolarEdge
4.0000.0000
1.0210.1066
2.0052.0410
7F129A09-33
›
›
›
43