2. Tap the Server red arrow to set the communication method to be used for communication between
devices and the SolarEdge monitoring platform. The default is LAN. Refer to Setting Up Communication
on page 52 for a full description of these communication options.
NOTE
The Server menu shows only the communication options installed in the inverter.
LAN
Cellular
Wi-Fi
RS485-1
SolarEdge Slave
ZigBee
Slave
For detailed information about all the configuration options, refer to the Communication
Options Application Note, available on the SolarEdge website at
https://www.solaredge.com/sites/default/files/solaredge-communication_options_
application_note_v2_250_and_above.pdf.
Extended Power Commercial Inverter Installation Guide MAN-01-00402-1.0
Chapter 5: Activating, Commissioning and Configuring the System Using SolarEdge
Server
ü
S_OK
39