SolarEdge SE50K Installation Manual page 27

Mounting and Connecting the Primary and Secondary Unit(s)
Communication cable to communication connector
l
DC cables to DC+ and DC- connectors
l
AC cable to AC connector
l
Ensure the white mark on the AC connector, is lined between the arrows on the AC cable.
o
Plug the A C cable into the Secondary Unit.
o
Rotate the cable connector clockwise to fasten it.
o
Figure 16: Connecting the AC connector to a Secondary Unit
NOTE
When connecting the AC cable to the left secondary Unit, loop the cable ( see the following figure) to
prevent pressure on the gland.
26
Extended Power Commercial Inverter Installation Guide MAN-01-00402-1.0