Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SolarEdge SEHAZB-SCKT-MTR-XX
Summary of Contents for SolarEdge SEHAZB-SCKT-MTR-XX
- Page 2 You can configure the Device Control products locally through the SolarEdge inverter or remotely, via the SolarEdge monitoring portal. The SolarEdge Plug-In Socket (referred to as "the device") is a ZigBee wireless AC switch with a built-in energy and power-consumption meter that provides power measurements up to 2.5kW. Based on these measurements and on the system configuration it switches the loads on and off.
-
Page 3: Installation
To enable the Plug-in socket functionality, the following supporting devices must be installed: Device Control ZigBee Module, installed inside the inverter. For physical installation refer to http://www.solaredge.com/sites/default/files/se-device-control-zigbee-module-installation- guide.pdf. SolarEdge Modbus Meter. Refer to http://www.solaredge.com/files/pdfs/solaredge-meter- installation-guide.pdf Installation Figure 3: The Plug-in Socket... - Page 4 4. From the main menu select Device Manager. The Device Manager screen is displayed: A d d D e v i c e s < 0 > 5. Select Add Devices to start the device association with the inverter. SolarEdge-Plug-in socket Installation Guide...
- Page 5 D e v i c e P r o p e r t i e s D e v i c e I n f o R e m o v e D e v i c e SolarEdge Plug-in socket Installation Guide...
- Page 6 S a v e S c h e d u l e D i s a b l e D e l e t e Use Disable to deactivate a schedule or Delete to remove it. SolarEdge-Plug-in socket Installation Guide...
- Page 7 Mode è Auto and set the parameters of any menu: Smart Modify the schedule configuration Save/Schedule. Disable or delete a schedule Select Disable or Delete from the Schedule screen. Select Remove Device or Remove All from the device Disconnect the device(s) from the network screen. SolarEdge Plug-in socket Installation Guide...
-
Page 8: Verifying The Connection
Reset seconds) Flashing red No ZigBee association with the inverter Flashing green ZigBee association in process Solid green ZigBee association completed and the relay is closed Solid red ZigBee association completed and the relay is open SolarEdge-Plug-in socket Installation Guide... -
Page 9: Troubleshooting
All the devices are not communicating Try to solve using these options. If problem is not solved, proceed with the next option: Check the ZigBee status screen: Verify that Network problems PAN has been established and Channel is not SolarEdge Plug-in socket Installation Guide... - Page 10 Remove devices associate more than 10 Remove an unused device from the device list from the device list is devices to the load before attempting to add another device. displayed in the LCD. managemnt network. SolarEdge-Plug-in socket Installation Guide...
-
Page 11: Specifications
IP30 Dimensions (H x W x D) 110 x 50 x 40 1 Multiple plug types for various sockets: XX = GB, DE, FR, IT 2 Approximate values. May differ depending on specific installation conditions. SolarEdge Plug-in socket Installation Guide...