Address Dip Switches; Addressing With Bacnet Protocol; Addressing With Modbus Protocol - Vaisala GMW95 Quick Manual

Address DIP Switches

Dip switches marked Address Binary Weighting set
the MAC address of the transmitter. The address is
encoded in eight bit binary form, with each numbered
switch representing a single bit. For example:
128 64 32 16 8
ON
1 2 3 4 5 6 7 8

Addressing with BACnet Protocol

BACnet MS/TP MAC address range is 0 ... 255. The
address determines if the transmitter is a master or
slave:
- Address range 0 ... 127: transmitter is a master.
- Address range 128 ... 255: transmitter is a slave.

Addressing with Modbus Protocol

Transmitter is always a Modbus slave. MAC address
range for Modbus slaves is 1 ... 247.
128 64 32 16 8
ON
1 2 3 4 5 6 7 8
Address
(Binary Weighting)
4 2
4 2 1
1
Binary: 10100001
=
Decimal: 161
(128 + 32 + 1)
EN
11