Siemens SIPART PS2 series Hardware Installation Manual page 14

Installing/mounting
3.1 Basic Safety Instructions
Impermissible accessories and spare parts
Danger of explosion in areas subject to explosion hazard.
• Only use original accessories or original spare parts.
• Observe all relevant installation and safety instructions described in the instructions for
It is possible to damage the cover gasket
If the cover gasket is not positioned correctly in the groove of the base plate, it could be
damaged when the cover is mounted and screwed tight.
• Therefore make sure that the gasket is seated correctly.
Open cable inlet or incorrect cable gland
Danger of explosion in hazardous areas.
• Close the cable inlets for the electrical connections. Only use cable glands or plugs
Exceeded maximum ambient or process media temperature
Danger of explosion in hazardous areas.
Device damage.
12
WARNING
the device or enclosed with the accessory or spare part.
WARNING
WARNING
which are approved for the relevant type of protection.
WARNING
Venting Gauge Block Installation Instructions
Hardware Installation Manual, 12/2014, A5E34388399-AD