Chapters
Table of Contents
Related Manuals for THOMSON ACG905-C
Summary of Contents for THOMSON ACG905-C
- Page 1 Advanced Cable Gateway...
- Page 2 © 2008 Thomson SA. All rights reserved. Republication or redistribution of Thomson content, including by framing or similar means, is prohibited without the prior written consent of Thomson SA. ‘THOMSON’ and the Thomson logo are registered trademarks and trademarks of Thomson SA.
- Page 3 Safety Technical Specifications Technical Specifications for Advanced Cable Gateway Model Type ACG905 -- C Operating Voltage 120V AC / 60 Hz / 0.5A Typical Power Consumption 25W max Weight 0.872 Ib / 0,395 kg Dimensions (W x H x D) 7.79 x 7.68 x 3.94 Inch Operating Temperature Range 59 to 113°...
- Page 4 Safety Safety Recommendations Using Equipment Safely - Gateway Your Advanced Cable Gateway has been manufactured to meet American safety standards, but care must be taken to ensure proper performance. It is important that you read this booklet completely, especially the safety instructions below. If you have any doubts about the installation, operation, or safety of the Gateway, please contact your Customer Service.
- Page 5 2 conditions: 1. This device may not cause harmful interference; 2. This device must accept any interference received, including interference that may cause undesired operation. Responsible party (contact for FCC matter only): THOMSON Inc. 101 W. 103rd St. Indianapolis, IN 46290 U.S.A.
-
Page 6: Using Equipment Safely - Handset
Safety Using Equipment Safely - Handset In order to understand the key features of your TH58 Handset, it is recommended that you read this guide carefully, including all the safety instructions, before using the product. It is recommended that you inform other members of your family (especially your children) of the detailed warnings given in this guide. - Page 7 Safety Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.
-
Page 8: Table Of Contents
Contents Table of Contents Technical Specifications Safety Recommendations Using Equipment Safely - Gateway Using Equipment Safely - Handset Telephone Jack Requirements Phone Installation Digital Security System Important Installation Guidelines About your Advanced Cable Gateway Key Features Main Technical Characteristics Computer Requirements Before You Start Box Contents Become Familiar with Your Gateway and Handset... - Page 9 Contents Access and Change Gateway Advanced Settings Outline of Web Manager Gateway – Status Web Page Group 1. Software 2. Connection 3. Password Gateway – Telephony Web Page Group 1. Base 2. Handsets Gateway – Router Web Page Group 1. LAN 2.
- Page 10 Safety viii...
-
Page 11: About Your Advanced Cable Gateway
Introduction About your Advanced Cable Gateway Key Features Thank you for choosing the ACG905, the new generation of Thomson Gateways with enhanced functionalities. The Advanced Cable Gateway offers the following services: • Multi-Line Capability, Up to 5 Handsets* • Access to Voicemail, Address Book, News, Weather and other... -
Page 12: Before You Start
Parts and Putting them Together Before You Start Box Contents Advanced Cable Gateway DECT handset TH-58 with Dock WiFi Card Power Cord Rechargeable Batteries Ethernet Cable Battery DC adapter for DECT handset User Guide on CD... -
Page 13: Become Familiar With Your Gateway And Handset
Parts and Putting them Together Become Familiar with Your Gateway and Handset 1. Gateway Front Panel POWER Power BATTERY Battery Back-Up Level (low / full / empty or no battery detected) DS/US Cable DOCSIS State; LED ON during start-up operation ONLINE Internet Active LINK... -
Page 14: Gateay Rear Panel
Parts and Putting them Together 2. Gateay Rear Panel Back-Up Battery Cover Power Input 120V AC. 60Hz, 0.5A Page USB RESET ETHERNET 1 ETHERNET 2 TEL CABLE PAGE To ring all connected Handsets ( short press ) Add another DECT Handset to the Gateway ( press for more than 12 seconds ) Reset to factory settings ( press at power off;... -
Page 15: Handset Overview
Parts and Putting them Together 3. Handset Overview Layout Hands-Free Loudspeaker Earpiece Audio output for telephone calls. Side Key Use the up and down key of the side button to increase or decrease the listening volume Left & Right Softkey described on page 18 Color Ring Start... - Page 16 Parts and Putting them Together...
-
Page 17: Setting Up Your System
Set-up Setting up Your System These are the steps to set up your system. They are described step by step in detail on the following pages; so, when you are ready, turn the page to get started. . . Basic Set-up Install the WiFi Card Step 1: Install the Gateway Battery... -
Page 18: Install The Wi-Fi Card
Charging and Batteries Install the Wi-Fi Card The Advanced Cable Gateway is ready to support Wi-Fi and comes with a card. Follow these instructions for installation: WARNING: The Gateway must be unplugged from the wall socket before you attempt to install the Wi-Fi card. Remove the protective cover over the Wi-Fi slot located on the upper right FRONT of WiFi card... -
Page 19: Install The Gateway Battery
Charging and Batteries Install the Gateway Battery Should the electricity go out, this will provide backup power to the Gateway: Ensure the power cord is unplugged. Remove the battery cover on the rear panel. There are two battery compartments. One battery is included with the Advanced Cable Gateway. -
Page 20: Install The Handset Batteries
Keep batteries out of the reach of children. • Remove batteries if storing over 30 days. NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries). -
Page 21: Charge The Handset With The Dc Adapter
Charging and Batteries Charge the Handset with the DC Adapter The DECT Handset will charge when securely placed in the Handset Dock so long as the dock has power. The dock can charge your handset while attached to the front of the Advanced Cable Gateway or by using the DC adapter included with the Gateway. -
Page 22: Charge The Handset Docked To The Gateway
Charging and Batteries Charge the Handset Docked to the Gateway In this situation, the Advanced Cable Gateway will be charging your handset. To plug your DECT Handset Dock on the Gateway, follow the instructions below: Be certain that the power cord to the Advanced Cable Gateway is unplugged. -
Page 23: Connecting Cables
Connect Cables Connecting Cables Connections Overview Wireless Connections Wi-Fi computer Cable Connections Handset Advanced with Cable Wi-Fi card dock Gateway cable splitter RJ-45 RJ-11 RJ-45 Telephone computer (1) Connections Ethernet Connections analog phone computer (2) Important Information: Your cable company should always be consulted before installing a new cable outlet. -
Page 24: Connect One Or Two Computers With Ethernet Cables
Connect Cables Connect One or Two Computers with Ethernet Cables Make the connections to the modem in the following sequence: Connect one end of the coaxial cable to the cable connection on the wall, and the other end to the CABLE connector on the Advanced Cable Gateway. -
Page 25: Connect More Than Two Computers With Ethernet Cables
Connect Cables Connect More Than Two Computers with Ethernet Cables If you want to create hard wired connections to the ACG for more than two computers, you will need to purchase a Hub (Switch) for that purpose and the cabling necessary for those additional connections. Although a 10BaseT Hub or Switch can be used, it is not recommended. -
Page 26: Activate The Advanced Cable Gateway
Activating Services Activate the Advanced Cable Gateway Note: To activate your advanced cable gateway, please consult the activation instruction provided by your service provider. After installation of the Gateway, each time you turn it on (each time the modem is reconnected to the power), it goes through several steps before it can be used. -
Page 27: Setup Wireless Access For Your Laptop, Pc Or Other Device
Rating: 120V AC, 60Hz, 0.5A HW version: 05 E-MTA MAC@ 00D059E132 Made in China for THOMSON In order to take advantage of the Wi-Fi connection available to you with the Gateway you will need to setup your computer. Setup will be different depending on the year, brand, model and installed software of your computer.