Changing The Paper Size; Precautions For Changing The Paper Size; Changing Paper Size Settings - Ricoh SP C360 series User Manual

8. Adding Paper and Toner

Changing the Paper Size

Precautions for Changing the Paper Size

• When loading paper, take care not to trap or injure your fingers.
• If one or more paper feed trays are installed, do not pull out more than one tray at a time when
you are changing or replenishing paper or resolving paper jams. Pressing down forcefully on
the machine's upper surfaces can result in malfunctions and/or user injury.
• Do not stack paper over the limit mark.
• Do not change the size of the paper for the specified printing tray while documents are being
scanned or printed.
• After changing the paper size, be sure to specify the appropriate paper size in [Tray Paper
Settings]. If you do not, misfeeds might occur. For details, see page 120 "Changing Paper Size
Settings".
• To prevent multiple sheets from being fed at once, fan the paper before loading.
• Straighten curled or warped paper before loading.
• For details about the paper sizes and types that can be used, see page 124 "Supported Paper
Sizes and Types". If you load paper whose size is not indicated on the paper size dial, you can
specify the paper size in [Tray Paper Settings]. For details, see page 120 "Changing Paper Size
Settings".

Changing Paper Size Settings

After changing the paper size, specify the paper size using the control panel.
To use a paper size and feed direction other than those indicated on the paper size dial, set the dial to
" ", and then set the paper size and feed direction using the control panel.
1. Press [Home] (
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Tray Paper Settings].
4. Select a tray from [Tray Paper Size: Tray 1] and [Tray Paper Size: Tray 2] for which you
want to change the paper size.
120
) at the bottom of the screen in the center.