Table of Contents
Advertisement
Power button board
Description
Power button board for use in acid green models (includes rubber and thermal grease)
Power button board for use in ultra violet models (includes rubber and thermal grease)
Power button board for use in ghost white (includes rubber and thermal grease)
Power button board cable (includes thermal pad kit and thermal grease)
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the hard drive (see
7.
Remove the USB board (see
8.
Remove the CPU fan (see
To remove the power button board:
1.
Remove the tape from the board (1).
2.
Using a Phillips P0 screwdriver, remove the Phillips broad head PM1.6×1.8 screw (2) that secures the
power button board to the computer.
58
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
39).
Hard drive on page
47).
USB board and security bracket on page
Fans on page
50).
36).
55).
Spare part number
L20342-001
L20343-001
L20344-001
L20352-001
Hide quick links:
Advertisement
Table of Contents
