Hard Drive - HP 15-cx0000 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or cable.
Description
Hard drives:
2-TB, 5400-rpm
1-TB, 5400-rpm
1-TB, 5400-rpm
Hard drive bracket
Hard drive cable
Miscellaneous Kit (includes WLAN Mylar and hard drive cover Mylar)
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the hard drive:
1. Lift the hard drive ZIF connector (1), and then disconnect the hard drive cable from the system board (2).
2. Remove the four Phillips M2.0×5.0 screws (3) that secure the hard drive to the computer.
Bottom cover on page
Battery on page 39).
36).
Component replacement procedures
Spare part number
912487-857
766457-858
762990-006
L20325-001
L20324-001
L29160-001
47