Optane memory module
IMPORTANT:
drive. You cannot simultaneously install both an Optane memory module and a solid-state drive in the
computer.
Description
Optane memory module, 16 GB
Before removing the Optane memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the Optane memory module:
▲
Remove the Phillips M2.0×3.0 screw (1), and then pull the Optane memory module from the socket (2).
Reverse this procedure to install the Optane memory module.
46
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The M.2 connector that supports the Optane memory module can also support a solid-state
Bottom cover on page
Battery on page
36).
39).
Spare part number
L21753-001