Table of Contents
Advertisement
2.
Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
CAUTION:
not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Reverse this procedure to install a memory module.
IMPORTANT:
44
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To prevent damage to the memory module, hold the memory module by the edges only. Do
If only one memory module is installed, it must be installed in the bottom slot.
Hide quick links:
Advertisement
Table of Contents
