Table of Contents
Advertisement
Rubber feet
Description
Rubber feet for use in acid green models
Rubber feet for use in ultra violet models
Rubber feet for use in ghost white models
Before removing the rubber feet, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
To remove the rubber feet:
1.
Position the bottom cover so you can access the inside.
2.
From the inside of the bottom cover, use a thin tool to push through the holes to help disengage the feet
(1).
3.
From the outside of the bottom cover, peel the feet off the cover (2).
Reverse this procedure to install the rubber feet.
38
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
36).
Spare part number
L20321-001
L20322-001
L20323-001
Hide quick links:
Advertisement
Table of Contents
