SolarEdge StorEdge Installation Manual page 68

3. Optionally, set the battery OFF periods as follows:
a. Select Set Operation. A list is displayed, allowing 12 monthly profile setup:
J a n
F e b
M a r
A p r
b. Select a month. A list of options is displayed.
S t a r t
E n d
A l w a y s
A l w a y s
c. Select one of the options:
Select Always OFF to avoid battery usage entirely (for example during winter)
l
Set Start Time and End Time to set battery usage in specific hours and avoid usage during
l
specific hours throughout the month (for example at night). This sets the periods during
which the battery will be in the OFF state.
Select Always ON to use battery at all times for charging/ discharging.
l
To set up Backup-only:
1. Access the Energy Control menu as described above.
2. Select Backup only. The Energy Manager screen changes to display the following:
L i m i t
E n e r g y
S t o r a g e
To set up Backup Power + Smart Energy Management:
1. Verify that Backup is set to E nable as follows (Backup shouuld be enabled by default if the hardware
supports it).
a. Enter Setup mode to display the main menu:
C o u n t r y
L a n g u a g e
C o m m u n i c a t i o n
P o w e r
B a c k u p
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
b. From the main menu select Backup Conf.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0
< O N >
< O N >
< O N >
< O N >
T i m e < 0 0 : 0 0 >
T i m e < 0 0 : 0 0 >
O N
O F F
C o n t r o l < D i s >
C t r l < B U >
C o n t r o l
< U S A + >
< E n g >
C o n t r o l
C o n f < E n >
Chapter 9: System Configuration
67