Maintenance; Information - SolarEdge StorEdge Installation Manual

Maintenance

Maintenance
Select Maintenance to set the following options:
D a t e a n d
R e s e t C o u n t e r s
F a c t o r y
S W U p g r a d e
A F C I < E n >
D i a g n o s t i c s
S t a n d b y
G r i d P r o t e c t i o n
O p t i m i z e r
Date and Time: Set the internal real-time clock. If connected to the SolarEdge monitoring portal, the
l
date and time are set automatically and only time zone should be set.
Reset Counters: Resets the accumulated energy counters that are sent to the SolarEdge monitoring
l
portal
Factory Reset: Performs a general reset to the d efault device settings.
l
SW Upgrade SD-Card: Perform a software upgrade using an SD card.
l
Diagnostics: Displays the Isolation Status and optimizers status screens. Refer to
l
http://www.solaredge.us/files/pdfs/application_note_isolation_fault_troubleshooting.pdf.
AFCI: Enables or disables arc-fault self-test.
l
Manual AFCI Test: Accessible from the LCD Light button menus only. Starts a self-test for arc
l
detection.
Standby Mode: Enables/disables Standby Mode - for remote commissioning.
l
Grid Protection: Available in specific countries. Enables viewing and setting grid protection values.
l
Refer to http://www.solaredge.com/files/pdfs/viewing_grid_protection_values.pdf.
Optimizer Conf.: Accessible from the LCD Light button menus only (the inverter ON/OFF swittch
l
must be ON). Enables the Rapid Shutdown feature when a kit is installed in the inverter.

Information

Select Information to display the following options:
V e r s i o n s
E r r o r L o g
W a r n i n g
H a r d w a r e
Versions: Displays inverter firmware versions:
l
ID: The inverter ID.
o
DSP 1/2: The DSP digital control board firmware version
o
CPU: The communication board firmware version
o
NOTE
Please have these numbers ready when you contact SolarEdge Support.
Error Log: Displays the last five errors.
l
Warning Log: Displays the last five warnings.
l
48
T i m e
R e s e t
S D - C a r d
M o d e
C o n f .
l o g
I D s
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0