Power Control; Display - SolarEdge StorEdge Installation Manual

Wi-Fi Conf (enabled only if the internal module is connected):
RS232 Conf:
D e v i c e
P r o t o c o l < G S M >
S e t A P N
S e t M o d e m
S e t U s e r
S e t P a s s w o r d
GPIO Conf:
D e v i c e

Power Control

For detailed information about active and reactive power control options refer to the Power Control
Application Note, available on the SolarEdge website at http://www.solaredge.us/files/pdfs/application_
note_power_control_configuration.pdf.
G r i d C o n t r o l
E n e r g y
R R C R C o n f .
R e a c t i v e
A c t i v e
P h a s e B a l a n c e
W a k e u p
P ( f )
A d v a n c e d
L o a d D e f a u l t s
NOTE
Phase Balance is applicable to single phase inverters only. For detailed information, refer to the
SolarEdge Phase Balancing Manual, available on the SolarEdge website at
http://www.solaredge.us/files/pdfs/phase_balancing_connection_guide.pdf
The Grid Control option is disabled by default. Enabling it opens additional options in the menu, as shown
on page 41.

Display

Select Display to set the following:
T e m p e r a t u r e
L C D O n
T L M O n
Temperature: Select Celsius or Fahrenheit units.
l
LCD On Time <30>: The number of seconds that the LCD backlight is ON after pressing the LCD light
l
button. Set a value within the range of 10-120 seconds.
TLM On Time <15>: The number of minutes that the LCD backlight is ON while viewing the Telemetry
l
window. Set a value within the range of 1-120 minutes.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0
T y p e < S E >
T y p e
N a m e
T y p e < R R C R >
< E n >
M a n a g e r
P w r C o n f .
P w r C o n f .
< D i s >
C o n f .
< C >
T i m e < 3 0 >
T i m e < 1 5 >
Chapter 7: User Interface
47