3. Use the three rightmost internal LCD user buttons to type in the following password: 12312312. The
following message is displayed:
C o u n t r y
L a n g u a g e
C o m m u n i c a t i o n
P o w e r
B a c k u p
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
The i nverter is now in Setup mode and all its LEDs are lit. The i nverter automatically exits Setup mode if no
buttons are pressed for more than 2 minutes.
The following shows a hierarchical tree of the menu options, which are described in Configuration Menu
Options on page 45. Actual menus may vary from shown depending on the firmware version of the
inverter.
Main menu:
C o u n t r y
L a n g u a g e
C o m m u n i c a t i o n
P o w e r
B a c k u p
D i s p l a y
M a i n t e n a n c e
I n f o r m a t i o n
Country:
U S A +
Language:
E n g l i s h
G e r m a n
S p a n i s h
F r e n c h
I t a l i a n
1
Communication
S e r v e r < L A N >
L A N
C o n f
R S 4 8 5 – 1
Z i g B e e
W i - F i
R S 2 3 2
C e l l u l a r
G P I O
C o n f
1 If ZigBee is connected, the Wi-Fi Conf menu is not displayed. If ZigBee is not connected, ZigBee Conf and Wi-Fi Conf are
both displayed with <N/A>.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0
< U S A + >
< E n g >
C o n t r o l
C o n f
< E n >
< U S A + >
< E n g >
C o n t r o l
C o n f
< E n >
C o n f < S >
C o n f < S >
C o n f < N / A >
C o n f
C o n f
< M T R >
Chapter 7: User Interface
41