Connecting Communication To The Meter - SolarEdge StorEdge Installation Manual

Connecting Communication to the Meter

Prepare cables and connect the communication wires as described in the following table. For detailed
information refer to the installation guide supplied with the meter.
Recommended cable type
(min-max AWG)
RS485 24 AWG (16-24 AWG),
shielded twisted pair, 600V
insulated
If you have a meter with SolarEdge label, connect as illustrated below:
If you have a meter with WattNode label, connect as illustrated below:
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0
External Devices
connection
Ext. Devices 7-pin terminal
block: B, A, G
Figure 23: Connection to a meter (SolarEdge
Figure 24: Connection to a meter (WattNode)
Chapter 6: StorEdge Inverter Connections
Meter connection
RS485 4-pin terminal block: B, A, G
37