Installing The 9V Battery - SolarEdge StorEdge Installation Manual

Installing the 9V Battery
The following figure summarizes the connections in the StorEdge Connection Unit:
Installing the 9V Battery
The 9V battery is supplied with the inverter accessories.
1. Open the four internal screws securing the transparent cover to the StorEdge Connection Unit
enclosure and remove the cover.
2. Install the 9V battery in the holder on the top board of the StorEdge Connection Unit and connect it
to the battery pad.
28
Figure 16: The StorEdge Connection Unit connections
Figure 17: The battery holder
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.0