Drive R8 Assembly & Operating Instructions page 4

Assembly
Step 3
Fitting Handlebars
Insert the handlebar into the tubing
ensuring the brake cable is to the
outside of the Rollator frame.
Select the required height and secure
with the tightening handle supplied.
Turn clockwise to tighten and anti-
clockwise to unscrew.
Repeat for the other handlebar.
5
Handlebar
Brake
Cable
Tightening
handle
Tighten
Assembly
Step 4
Fitting Backrest
Remove all packaging from the
backrest.
Position the backrest ends into both
brackets, push in both backrest
'buttons' and fully insert into the
brackets.
Ensure the 'pins' are fully located in
the holes (see picture on the right).
To remove the backrest, pull both
'btttons' out and remove the backrest
from the brackets
Backrest
Button
Pin
6