Page 1
The manufacturer reserves the right to alter without notice any weights, measurements or other technical data shown in this manual. All figures, measurements and capacities shown in this manual are approximate and do not constitute specifications. Rollator (R6 and R8) Manufacturer: Drive Medical Ltd, Assembly & Operating Instructions Ainley’s Industrial Estate, Elland HX5 9JP.
Ensure the Rollator is always fully folded out before using. The R6 is ideal for indoor use, whilst the R8 is suitable for indoor and outdoor use. They are intended to be lightweight and portable whilst offering stability and security •...
Parts Description Assembling the Rollator The diagram below shows a four wheel Rollator. Step 1 Remove packaging Remove the Rollator and all components from the packaging. Lay out the Rollator. Handles / Brake Levers Step 2 Unfolding the Rollator To unfold the Rollator, lift using the lifting strap which is located under the seat. Lower the Rollator down onto it’s wheels Backrest and push down on the...
Page 4
Assembly Assembly Step 4 Step 3 Fitting Handlebars Fitting Backrest Handlebar Backrest Brake Cable Tightening handle Remove all packaging from the backrest. Button Position the backrest ends into both Insert the handlebar into the tubing brackets, push in both backrest ensuring the brake cable is to the ‘buttons’...
Pull up on the brake lever until the unlocked lock removes (as shown by the green arrow). Note: The brakes on Rollators are factory set and should not require adjustment. For technical assistance on the Rollator brakes, contact your Drive Medical Ltd dealer.
To unfold the Rollator: This warranty is issued free of charge by Drive Medical to the original retail purchaser of Lift the Rollator using the lifting strap which is located under the seat.