HP photosmart 930 series User Manual page 80

Problem
The camera
does not take
a picture
when I press
the Shutter
button.
80
Possible cause
You did not
press the
Shutter button
hard enough.
The memory
card is not
installed.
The memory
card is full.
The memory
card is locked.
The flash is
recharging.
The camera is
set to Macro
focus, but the
focus is farther
away than the
macro (close-
up) range.
The camera is
still saving the
last picture
you took.
hp photosmart 930 series user's manual
Solution
Press the Shutter
way down.
Install the memory card.
Unload images from the camera
to your computer, then delete all
images on the memory card. Or
replace the card with a new one.
Switch the locking tab on the
memory card to the unlocked
position.
Wait until the flash has recharged
before taking another picture.
Re-focus the camera so that it is
within the macro (close-up)
range. (See the range for
focus in Setting the focus range
on page 30.)
Wait a few seconds for the
camera to finish processing the
last image before taking another
picture.
button all the
Macro