HP photosmart 930 series User Manual page 69

To print directly to an HP Photosmart printer or to any other
HP printer with a front panel USB port:
1
Check that the printer is turned on and
is online. (There should be no blinking
lights on the printer or error messages
displayed about the printer.) Load
paper into the printer, if needed.
2
Your camera came with a special USB
cable for connecting the camera
directly to a printer. Connect the square
end of the USB cable to the printer.
3
Open the rubber door on the side of
the camera and connect the small end
of the USB cable to the USB connector
on the camera.
The Print Setup
the camera. If you already
selected images to print from the
camera Share
of images selected will be shown,
as in this example
menu. Otherwise,
will be displayed.
4
Adjust the settings in the
buttons to highlight a menu option and the
buttons to change the setting for each option.
NOTE
There is a print preview in the lower right-hand corner
of the Print Setup
be used for printing images. This print preview updates as
you change the settings for the
5
Press the OK
Chapter 5: Unloading and printing images
menu displays on
menu, the number
Print Setup
Images: ALL
Print Setup
screen showing the page layout that will
button to begin printing.
menu by using the
Print Size and Paper Size.
69