Printing Images - HP photosmart 930 series User Manual

NOTE
If your computer is running Windows XP, when you
turn on the camera in the next step, a dialog box will
display that requests you to
launch for this
this dialog box.
4
Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome screen, click
images in the camera that were selected in the
for printing or e-mail, those actions are started after the
images have been unloaded to the computer.
5
When the unload screen on the computer says Finished,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE
To unload images to a computer that does not have the
HP Photo & Imaging software installed on it, change the
USB Configuration
See USB configuration
camera to appear as another disk drive on the computer
so that you can easily copy the image files from the
camera to the hard drive of your computer.

Printing images

To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP Photosmart
printer or to any other HP printer with a front panel USB port,
then print images selected from the camera
images in the camera.
68
Select the program to
action. Simply click on
Start Unload. If there were any
setting to
on page 72. This allows the
hp photosmart 930 series user's manual
Cancel
Disk Drive in the
Share
to close
Share menu
Setup menu.
menu or all