Pneumatic Connection; Pneumatic Connection For 6Dr5..0/1/2/3; Integrated Pneumatic Connection - Siemens SIPART PS2 Operating Instructions Manual

5.3

Pneumatic connection

5.3.1

Pneumatic connection for 6DR5..0/1/2/3

Structure
The pneumatic connections are provided on the right side of the positioner.
①
②
③
④
⑤
Figure 5-12
5.3.2

Integrated pneumatic connection

Structure
The following pneumatic connections are provided at the rear side of the basic device for the
integrated attachment for single-acting linear actuators:
● Actuating pressure Y1
● Exhaust air outlet
These connections are sealed with screws when the device is delivered.
The exhaust air outlet is corrosion-resistant for the blanketing of the pick-up room and the
spring chamber with dry instrument air.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
Actuating pressure Y1 for single and double-acting actuators
Positioner shaft
Supply air PZ
Actuating pressure Y2 for double-acting actuators
Exhaust air outlet with a sound absorber
Pneumatic connection on the standard controller
Connection
5.3 Pneumatic connection
87