Siemens SIPART PS2 Operating Instructions Manual page 70

Installing/mounting
4.6 Installing option modules
Device features
● EMC protection
● Connection to basic electronics
● Connecting terminals for an external potentiometer
Figure 4-16
Requirement
● You have an EMC filter module, article number C73451‑A430‑D23.
● The module cover is removed.
● Any already installed optional module has been removed.
A description of how to remove the module cover and install the optional modules is provided
in the section "General information on installing option modules (Page 51)"
Procedure for installing the EMC filter module
①
②
③
④
Figure 4-17
70
EMC filter module
EMC filter module terminals
Positioner
Yellow wheel for locking the position detection
Ribbon cable connector of fitted potentiometer,
or ribbon cable connector of EMC filter module
Installation EMC filter module
⑤
Basic electronics
⑥
Screw
⑦
EMC filter module C73451-A430-D23
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC