Siemens SIPART PS2 Operating Instructions Manual page 57

11.Continue to assemble the positioner by executing steps 7 to 5 in reverse order. Check
whether the position of the O-rings is correct. Make sure no loose items in the enclosure
interfere with the assembly.
12.Now check carefully whether the feedback shaft
If you feel resistance, do not continue to turn but turn the feedback shaft
the point of removal, making sure to remember the previously performed steps.
13.Once you have completed all previous steps successfully, continue by performing steps 4
to 1 in reverse order.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
Installing/mounting
4.6 Installing option modules
⑲
can be smoothly turned by 360°.
⑲
back again to
57