Siemens SIPART PS2 Operating Instructions Manual page 46

Installing/mounting
4.3 Mounting the part-turn actuator
10.After commissioning, drive the positioner to the end position.
11.Stick the scale
①
H = height of shaft butt
①
②
Figure 4-6
46
④
with the direction of rotation or the swivel range on the coupling wheel
. The stickers with scale are self-adhesive.
Adhesive label with scale
Ø35 (1.38)
F05-Lkr.-Ø50 (1.97)
Fixing level of positioner on mount
Part-turn actuator
Dimensions of mount in accordance with VDI/VDE 3845 (depends on actuator)
Adhesive label with scale, flameproof enclosure
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC